Δεν σας αρέσει; Δεν πειράζει! Μπορείτε αν θέλετε να κάνετε επιστροφή εντός 30 ημερών.
Δεν θα κάνετε ποτέ λάθος με μια δωροεπιταγή. Χαρίστε στους αγαπημένους σας την επιλογή να διαλέξουν οι ίδιοι οτιδήποτε από τη συλλογή μας.
30 ημέρες για την επιστροφή των προϊόντων
Abstract of CLASS-4 ACTIVE TWO-WAY RFID TAG:- UHF Radio Frequency Identification (RFID) is a promising technology that has experienced tremendous growth by revolutionizing a variety of industry sectors and applications. Despite its wide use, the ability to track an object when the tag goes out of tracking/read range has been a major drawback. This thesis proposes a design of an analog front-end architecture and the baseband controller for a novel class-4 active two-way (C4-ATW) RFID tag to maximize/increase the tracking range by using a tag hopping technique. The tag hopping technique enables C4-ATW RFID tags to power their own communication with other C4-ATW or passive RFID tags to maximize the read range while the reader s functionality remains unchanged. Simulation results using 90 nm 1P9M CMOS process parameters indicate that a C4-ATW RFID tag can operate at a minimum input power of -20 dBm at a 120 kbps data rate; the achieved read range between reader to tag is 36.7 m at 4 W reader power, and tag-to-tag is 2.2 m at 25 mW of tag power. Combined, the analog front end and baseband controller consume 50.3 mW of power and the area of the chip, including pads, is 854 µm x 542 µm